Glacier bay 874-0101 Guía De Instalación Y Cuidado página 11

Installation (continued)
9
Removing the plastic cap
□
Before installing the escutcheon (E), remove the
plastic cap (1) from the valve body (D) by twisting
the cap in a clockwise direction when the depth
distance which is measured from center of
shower outlet to nished wall surface is 2 in. to
2-1/2 in.. Or unscrew the screws (K) and remove
the plaster guard (L) when the depth distance
which is measured from center of shower outlet
to nished wall surface is 1-1/2 in. to 2 in..
1
K
L
11
Installing the shower head
□
Attach the shower head (C) to the shower arm
(B). Carefully tighten the shower head (C) with
a clean strap wrench.
D
N
OR
D
11
10
Installing the escutcheon
and handle
□
Install the escutcheon (E) onto the valve body
(D) using the escutcheon screws (M). Place
the handle assembly (F) onto the valve body (D),
and secure it with the screw (G).
□
Use a Phillips screwdriver to tighten the screws
(M and G).
□
Insert the index (N) into the handle (F).
M
F
G
B
C
Please contact 1-855-HD-GLACIER for further assistance.
E
HOMEDEPOT.COM/GLACIERBAY
D