Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Table of Contents
Table of Contents .......................................................... 2
Safety Information ......................................................... 2
Warranty ......................................................................... 3
Pre-Installation .............................................................. 3
Installation ..................................................................... 6
Safety Information
1.
To reduce the risk of electric shock, ensure the
electricity has been turned off at the circuit breaker or
fuse box before you begin.
2.
All wiring must be in accordance with the National
Electrical Code ANSI/NFPA 70-1999 and local electrical
codes. Electrical installation should be performed by a
quali ed licensed electrician.
3.
The outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum
of 35 lbs. (16 kg). Use only UL-listed outlet boxes marked
"For Fan Support."
4.
The fan must be mounted with a minimum of 7 ft (2 m)
clearance from the trailing edge of the blades to the
oor.
5.
Do not operate the reversing switch while the fan blades
are in motion. You must turn the fan off and stop the
blades before you reverse the blade direction.
6.
Do not place objects in the path of the blades.
7.
To avoid personal injury or damage to the fan and other
items, use caution when working around or cleaning the
fan.
8.
Electrical diagrams are for reference only. Light kits that
are not packed with the fan must be UL-listed and
marked suitable for use with the model fan you are
installing. Switches must be UL General Use Switches.
Refer to the instructions packaged with the light kits and
switches for proper assembly.
9.
After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into
outlet box. The wires should be spread apart with the
grounded conductor and the equipment-grounding
conductor on one side of the outlet box.
10. All setscrews must be checked and retightened where
necessary before installation.
Assembly ....................................................................... 7
Operation .................................................................... 12
Care and Cleaning ...................................................... 13
Troubleshooting .......................................................... 14
WARNING:
do not bend the blade brackets (also referred to as
anges) during assembly or after installation. Do not
insert objects in the path of the blades.
WARNING:
shock, do not use this fan with any solid-state speed
control device.
WARNING:
turn the electricity off at the main fuse box before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed
electrician.
WARNING:
only. Optional use of any light kit must be UL-listed
and marked suitable for use with this fan.
WARNING:
shock, this fan should only be used with fan speed
control part no. Fan28R-240W, manufactured by
Chai Wei Electric Co., LTD.
CAUTION:
use only the screws provided with the outlet box.
2
To reduce the risk of personal injury,
To reduce the risk of re or electric
To avoid possible electrical shock,
Electrical diagrams are for reference
To reduce the risk of re or electric
To reduce the risk of personal injury,
Capítulos
Tabla de contenido
Solución de problemas
