Preparation Before Use; Using The Appliance - FAR SO&LEO CI Manual De Utilización

PREPARATION BEFORE USE

Tube
• To attach the tube, insert it into the appliance and turn until it locks. To remove
the tube, press on the device either side of the tube and then remove from
the appliance. See Fig.1
Telescopic tube
• Press the spring push-button on the side of the telescopic tube and slide the
locking button towards to opening of the other end of the tube.
• Connect the telescopic tube to the tube handle, insert the straight part into the
larger section and turn slightly.
• Adjust the telescopic tube to the most suitable length for vacuum cleaning.
• Slide the switch on the tube upwards and push the bottom section of the tube
upwards to downwards. See Fig.2
Floor brush
• You can use the floor brush on carpet or hard floors.
• To clean hard floors, use your foot to press the switch on the top of the floor brush
to extend the brush.
• To clean carpets, use your foot to press the other side of the switch on the top of
the floor brush to retract the brush.
Integrated brush and nozzle
• Your vacuum cleaner comes with a range of accessories.
• Fit the integrated brush and nozzle directly to the handle or tube.
Use the narrow nozzle to vacuum small spaces, tight corners or
1.
hard-to-reach places.
Use the brush and nozzle to clean computers, steps etc.
2.

USING THE APPLIANCE

You can carry the vacuum cleaner using the handle located on the top of
the appliance. See Fig.3
Unwind the power cable from inside the appliance and plug into an electric
1.
power socket.
English
GB-5