How To Operate - Steren LCD-010 Manual Del Usuario

Make sure to install batteries in the device previously. Make sure to install batteries in the device previously.
Usually, the yellow cable sends the video signal, and Red and Usually, the yellow cable sends the video signal, and Red and
White cables are from audio signals, in case your video player White cables are from audio signals, in case your video player
have only one audio input, only plug the Red cable. have only one audio input, only plug the Red cable.

HOW TO OPERATE

1.- Extend the glasses' arms.
2.- Remove the earphones from the compartment.
3.- Adjust the nose pad to obtain a better angle of vision.
4.- Power on the glasses and the video player.
5.- Set the volume to minimum level.
6.- Place the lenses in natural way over your head, then put the arms of
the glasses over your ears. Finally adjust the glasses in order to see the
LCD screens in front of your eyes.
7.- Place the earbuds in your ears.
8.- Playback a video, now you will
see the image in the glasses.
9.- Set the volume level.
10.- After their use, remove them
from their head, replace the
earphones in compartments and
power off the device.
ENGLISH-08