Tabla de contenido
Idiomas disponibles
Idiomas disponibles
B5
B4
1/16" bit
Drill a pilot hole at the TOp of each outline.
Mark position of screws by using holes as a template.
B7
B6
Insert mounting screws, leaving space between the
Attach the rails onto the screws.
screw head and the joist. (Screws are supplied.)
B8
B9
3"
Tighten screws.
Run the power supply wire through the strain relief, leav-
ing 3" between the end of the wire and the strain relief.
Tighten the strain relief around the wire.
42936-01 10/17/2007
8
Tabla de contenido
