How To Use - Steren ET-100 Manual Del Usuario

HOW TO USE

1.- Remove the probe's cover and clean it with a damped cloth with
water.
2.- Place a new fi lter into the probe, assuring an accurate reading.
3.- Press On / Recall button once, you will hear a beep indicating that is
ON and you will see in the screen the message 00. 0°C
4.- Put the tip of the probe inside of the ear gently and carefully (try to
put it as deeper as you can).
5.- Press and hold Scan button for one second, you will hear a beep
indicating the temperature was taken.
6.- The reading displays in the screen and it will be stored in memory.
The thermometer will power off automatically after a minute. The thermometer will power off automatically after a minute.
If you have a doubt about the last reading, make sure to clean the If you have a doubt about the last reading, make sure to clean the
ear, removing earwax. Also clean the probe and if it's necessary ear, removing earwax. Also clean the probe and if it's necessary
use other fi lter. use other fi lter.
ENGLISH-05