Tools Needed For Assembly; Unpacking Instructions - Fanimation AIRE DELUXE Manual De Instrucciones

This manual is designed to make it as easy as possible for you to assemble,

Tools Needed for Assembly

•
ne hillips head screwdriver
• One stepladder
• hree wire connectors supplied
WARNING
!
Before assembling your ceiling fan, refer to section
on proper method of wiring your fan (page 9). If you
feel you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
For your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that all
steps have been completed and will be helpful in finding your place should you be interrupted.
WARNING
Do not install or use fan if any part is damaged or
missing. This product is designed to use only those
parts supplied with this product and/or any accessories
designated specifically for use with this product by
Fanimation. Substitution of parts or accessories not
designated for use with this product by Fanimation could
result in personal injury or property damage. Contact
your retail store for missing or damaged parts.
1. Check to see that you have received the following
parts:
NOTE: If you are uncertain of part description, refer to
exploded view illustration.
Hanger Bracket
Assembly
Downrod/
Hanger Ball Assembly
Ceiling Canopy
Canopy Screw
Cover Assembly
install, operate and maintain your ceiling fan
• One wire stripper
• One
lade
screwdriver

Unpacking Instructions

Motor Coupling
Cover Assembly
Fan Motor Assembly
Glass (FP6245B**)
iring outlet o and o connectors
re uired y the local code
conductor wire with ground of the following si e:
nstalled ire ength
p to
ft
ft
NOTE: Place the parts from the loose parts bags in a small
container to keep them from being lost. If any parts are
missing contact your local retailer.
• Fan Motor Assembly
• Downrod/Hanger Ball
Assembly
• Hanger Bracket Assembly
• Ceiling Canopy
• Canopy Screw Cover Assembly
• Motor Coupling Cover Assembly
• Switch Cup Assembly (FP6244**)
• Light Kit Assembly (FP6245B**)
• Glass (FP6245B**)
• Bulbs (FP6245B**)
• Blade Holder Set
• Blade Set
Switch Cup Assembly
(FP6244**)
Light Kit Assembly
(FP6245B**)
Blade Set
3
Materials
ust e of type
he ini u wire would e a
ire i e
ardware ags:
– 1/4˝-20 pan head screws
with lock washers
(blade holder to fan motor hub)
– 3/16˝-24 washer head screws
(blade to blade holder)
– Fiber Washer
– our ire Connectors
– alance it
Light Kit Chain Coupler
–
Fan Chain Coupler
–
(FP6244** & FP6245B**)
Bulbs (FP6245B**) Hardware Bags
Blade Holder Set
(FP6245B**)