Mopar 82210984 Serie Instrucciones De Instalación página 5

Hood Switch, Harness and Bracket Installation
1. Routing and connection of the hood switch harness.
a. Locate the hood switch bracket mounting
location in the front left fender, near the TIPM.
b. Using the provided mounting screw, secure the harness
ground and the hood switch mounting bracket to the
front fender in the location identified in the previous
step.
c. Route the hood switch harness connector up through the
mounting bracket and connect the hood switch. Push
the hood switch into the bracket until properly seated.
Mounting Bracket
Ground wire and provided mounting screw
5 of 10
Mounting Location
TIPM