Glacier bay VDR2522A1 Guía De Uso Y Cuidado página 12

Topmount
11
Flushing and checking for leaks
IMPORTANT: After installation is completed, turn on the
hot and cold water supplies. Check for leaks. Do not lose
the gasket (1) in the hose.
Pull the hose assembly out of the spout and remove
the spray head by unscrewing it from the hose in a
counterclockwise direction. Be sure to hold the end of
the hose down into the sink and turn the faucet to
the warm position where it mixes hot and cold water.
Flush the water lines for one minute. This flushes away
any debris that could cause damage to internal parts.
Check for leaks.
Re-tighten any connections if necessary, but do not
overtighten. Reinstall the spray head by hand tightening
it back onto the spray hose in a clockwise direction.
13
1
12
Removing the quick connector
If it is necessary to remove the quick connector (1),
squeeze the tabs (2) on the quick connector and then
pull down to disconnect.
Squeeze
12
2
Pull
down
1
1
Topmount Insta opmount Insta opmount I opmount I
8
Installing the soap Installing the soap
Topmount Install opmount Install opmount In opmount In
Insert the soap assembly (O) Insert the soap assembly (O)
8
in the sink. Secure the soap a in the sink. Secure the soap a
Installing the soap d Installing the soap d Installing the Installing the
From under the sink, screw th From under the sink, screw th
Insert the soap assembly (O) thro Insert the soap assembly (O) thro soap assembly (O) shank. Ins soap assembly (O) shank. Ins Insert the soap assem Insert the soap assem
in the sink. Secure the soap asse in the sink. Secure the soap asse into the soap assembly (O). in the sink. Secure the in the sink. Secure the
From under the sink, screw the s From under the sink, screw the s From under the sink, s From under the sink, s
soap assembly (O) shank. Insert soap assembly (O) shank. Insert soap assembly (O) sha soap assembly (O) sha
into the soap assembly (O).
Installing th Installing th
Insert the soap ass Insert the soap ass
in the sink. Secure in the sink. Secure
From under the sin From under the sin
soap assembly (O) soap assembly (O)