GE IM-5D Manual Del Propietário página 11

REMOVE FREEZER DRAWER CORNER
9
• Remove the drawer corner piece by pulling
out and up on three tabs while pushing
down on the back of the drawer . Then pull
out the side flange while pulling up on the
corner piece to complete the removal .
REPLACE FREEZER DOOR
10
• Pull the lower basket and slide mechanism
to full extension using both hands .
• Remove the basket resting on the slides .
If the basket is full of frozen goods, lift the
basket and set to the rear of the freezer
compartment until after the freezer door is
located on slides .
CAUTION
Lifting Hazard
Freezer door is heavy Use both hands to
secure the door before lifting .
• Lift the freezer door and align the tabs on
the door bracket sides with the square holes
in slide mechanisms .
• Replace the attachment screws and torque
the screws to 65 in-lb .
Installation Instructions
REPLACE FREEZER DOOR (Cont.)
10
• For adjusting freezer door gaps, follow the
instructions in the Owner's Manual .
• Replace freezer basket onto the slide
brackets and make sure the freezer door
operates and closes freely .
RE-INSTALL FREEZER DRAWER
11
• Re-install freezer drawer by placing the rear
drawer wheels onto the top of the track
mounted to the side of the freezer walls . The
front wheels on the freezer drawer should
be on top of the bottom basket sides . Place
the ice bucket in the drawer and push the
drawer into the freezer with the front of
the bucket (see page 10) to the front of the
basket, .
• Make sure:
- The ice bucket does not hit the icemaker
arm and the freezer drawer retracts
completely into the freezer compartment .
- The fill tube extends into the fill cup
opening at the back of the icemaker .
Align and insert tab
on Freezer Door
Bracket with slot
on Freezer Slide
Bracket .
NOTE: Place one
side in first and
then align the other
side .
11