Other Features; Activate Demonstration Mode; Adjust Brightness Of Display Panel; Set The Alarm Timer - Philips MCD712 Manual Del Usuario

9 Other features

Activate demonstration mode

You can see an overview of all features.
1
In the standby mode with clock display (if
set), press on the main unit to activate
the demonstration mode.
»
A demonstration of major available
features starts.
To deactivate the demonstration mode:
1
Press on the main unit again.
Adjust brightness of display
panel
1
In standby mode, press MODE/DIM
repeatedly to select different levels of
brightness for the display panel.

Set the alarm timer

1
Ensure that you have set the clock
correctly.
2
In standby mode, press and hold SLEEP/
TIMER.
»
The hour digits are displayed and begin
to blink.
3
Press + VOL - to set the hour, then press
SLEEP/TIMER again.
»
The minute digits are displayed and
begin to blink.
4
Press + VOL - to set the minute.
5
Press SLEEP/TIMER to confi rm.
» [OFF] (off) begins to blink.
28 EN
6
To activate the wake-up timer, press +
VOL - to select [ON] (on) while [OFF]
(off) is blinking.
»
A clock icon appears on the display.
»
The unit turns on automatically at
the set time and switches to the last
selected source.
»
To deactivate the alarm timer, select
[OFF] (off) at step 6.

Set the sleep timer

1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
»
The unit turns off automatically after
the set period of time.

Connect other devices

Listen to an audio player
You can listen to audio player with red/white
audio output sockets through this unit.
1
Connect a red/white audio cable (not
supplied) to the AUX IN L/R sockets and
to the audio output sockets on the audio
player.
2
Select the AUX source.
3
Start play on the audio player.