Technical Data; Intended Use; General Safety Instructions - wolfcraft TC 670 Expert Traducción Del Manual De Instrucciones Original

INTRODUCTION
• PLEASE NOTE: Read t he safet y and all ot her inst ruct ions that come w it h t he t ile cut t er TC 670 Expert . Failing t o do so and disregarding
t he saf et y and all ot her inst ruct ions may cause injuries.
• Keep t hese operat ing inst ruct ions for f ut ure ref erence in a saf e place.

TECHNICAL DATA

Equipment dimensions
wit h its handle in t he working posit ion:
maximum cut t ing lengt h:
t hickness of t he mat erial:
maximum cut t ing widt h wit h edge guide:
minimum cut t ing widt h:
weight :
SYM BOLS AND THEIR M EANING

INTENDED USE

The t ile cut t er is suit able f or cut t ing glazed, enamelled and ceramic t iles as well as (porcelain) st onew are and split t iles w it h a t hickness
ranging bet ween 4 and 14 mm and a lengt h of 670 mm. Depending on t he t ype of t iles and t heir thickness, a minimum cut t ing widt h
of 15 mm is possible.
The height of t he t ile will be pre-set via a slide (Fig. 7), w it h t he cut t ing f orce being set by an adjust ing lever (Fig. 8).
Ideally, t he t ile should be broken as close as possible t ow ards it s end, in t he case of diagonal cut s t he breaking rod should complet ely rest on
t he t ile.
Part s of larger t iles can be prevent ed f rom f alling dow n by using t he support s supplied.
Parallel cut s and angular cut s of 45° can be carried out w it h t he angle guide w hich can be at t ached on bot h sides of t he t ile cut t er.
Repeat cut s bet ween a minimum cut t ing w idt h of 50 mm and a maximum of 300 mm will be possible wit h an edge guide.
A precise diagonal cut requires t he use of a guiding aid.
Only suit able cut t ing w heels (wit h a diamet er of 20 mm, a thickness of 3 mm and a cut t ing angle of 110°) and t he original cut t ing
wheel mount s must be used.
The user shall be liable f or any damage and accident s t hat have been caused by t he improper use of t he equipment .

GENERAL SAFETY INSTRUCTIONS

1015 x 155 x 305 mm (w idt h x dept h x height )
670 mm
4 - 14 mm
300 mm
15 mm (maybe more, depending on t he t ile condit ions)
2.5 kg