Weekly Timer Operation - Hitachi RAF-25RPA Manual Del Usuario

WEEKLY TIMER OPERATION

lt is possible to select Mode A or Mode B.For each mode ,up to 6 programs can be set per day. ln total, a
maximum of 42 programs can be set for a week for each mode.
If calendar and clock are not set, the reservation setting for WEEKL
If calendar and clock are not set correctly, WEEKLY TIMER will not operate correctly.
Reservation for calendar and clock shall be set rst before operating WEEKLY TIMER.
Step 1 : Set the reservation schedule to the remote controller. Send the registered reservation to indoor
unit and then operate.
Step 2 : Select Mode A or Mode B and activate or deactivate WEEKLY TIMER .
Step 3 : Copy and cancel the reservation schedule.
Step 1 : Set reservation schedule to the remote controller. Send the registered reservation
to indoor unit and then operate.
fi
How to set a WEEKLY TIMER.
1. Select Mode A or Mode B.
1
Press
display. (Mode A is selected).
2
Press
(Mode B is selected).
If no reservation has been made, ON/OFF,
If reservation has been made, ON/OFF,
appear.
2. Set a program.
Press
can be changed.
, day: Mon, program no. : 1, ON/OFF, setting time and setting
temperature blink on the display.
3. Select the desired day of the wekk.
Press
The day changes from Mon
Mon, Tue, Wed, Thu, Fri, Sat, Sun [Full days]
3
Fri [weekday]
Select [Full days] for daily reservation.
Select [weekday] for Monday to Friday reservation.
Select [weekend] for Saturday and Sunday reservation.
After reservation has been set, it is easy to check and edit at the same
time.
4. Press
The number changes from 1
4
If program number has been set, follow above in order to make
changes.
Y TIMER cannot be set.
(WEEKLY) button.
(WEEKLY) button again,
(WEEKLY) button for about 3 seconds. The selection mode
(DAY) button.
Tue
Sat, Sun [weekend]
button to select a program number.
2
– 20 –
lights up. and blink on the
and blink on the display.
, appear.
,
Wed Thu Fri Sat
Mon, Tue, Wed, Thu,
Mon Tue ......
3 4 5 6 1
will not
Sun
2 .....