STEP 6
Carefully place unit on its front side.
Attach the back panel (I) as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
notch at this end
systembuild.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
(x36)
#A21110
I
Flush the edge of the back panel
with the bottom edge of the
bottom shelf. Align squarely and
nail straight through into back
edges.
13
* raw surface is shaded
You
Tube
