Operation
1
Flushing and checking for leaks
□
Detach the pull-down spray (B) from the pull-down spray hose (I). Hold the pull-down spray hose (I) firm to
prevent it from retracting into the faucet body (A).
□
Ensure the handle is in the off position. Turn the hot and cold water supplies on and check all connections
for leaks. If leaks are discovered, check the connections to ensure they are tight and properly secured.
□
Lift the handle to allow the water to run for approximately one minute. This flushes away any debris that
could damage the internal parts.
□
Turn the water off and reattach the pull-down spray (B).
B
2
Removing the quick connector hose
CAUTION: Use caution when removing the quick
connector hose to prevent cutting your hands.
□
If it is necessary to remove the quick
connector, push the quick connector
housing up, hold the housing together and
pull down.
A
7
2
1
A
3
HOMEDEPOT.COM/GLACIERBAY
1-855-HD-GLACIER