Installation - Glacier bay FP4A0033BNV Guía De Instalación Y Cuidado

Installation

1
Installing the faucet assembly
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old
faucet.
□
Clean off the mounting surface.
□
Remove the guide washer (F), metal washer (E)
and rubber washer (D) from the faucet.
□
Insert the pull-down spray hose (H), outlet hose
(C) and supply lines through the mounting hole
in the sink until faucet (A) sets on top of the
sink.
2
A
C
H
4
Securing the faucet
□
Loosen the screws on the guide washer (F) until
the ends of the screws are flush with the face of
the guide washer (F).
□
Attach the faucet (A) underneath the sink using
the rubber washer (D), metal washer (E) and
guide washer (F). Securely tighten the screws
on the guide washer (F).
1
D
E
F
A
3
H