Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Tools and Materials
Tape
Adjustable
Measure
Wrench
Drill
Jigsaw
Scissors
Before You Begin
CAUTION: Risk of personal injury or product damage. Handle
with care. Product can break, chip or cause injury if handled
carelessly. Get help lifting the lavatory.
CAUTION: Risk of property damage. Do not install this
lavatory on a glass countertop. The weight of the lavatory may
damage the glass countertop.
CAUTION: Risk of product damage. Do not apply plumbers
putty to this lavatory. Silicone sealant is required, as silicone
sealant will not discolor the product surface.
Observe all local plumbing and building codes.
If you are replacing an existing lavatory, turn off the water supply
to the faucet. Open the faucet valves to relieve pressure, then
disconnect the supply lines. Disconnect the drain assembly,
remove the trap, then remove the lavatory.
For new installations, ensure the water supply lines, drain piping,
vanity, and/or countertop is in place before proceeding with the
lavatory installation.
1061995-2-A
Silicone
Sealant
Pencil
Plus:
• Template (supplied)
• Rags or Paper Toweling
• Assorted Drill Bits
Safety
• Marker
Glasses
2
Masking Tape
Kohler Co.