Instructions For Cleaning; Reminders For Cleaning; Instructions For Maintenance; Reminders For The Maintenance Technician - KBS C74GD Instrucciones Para Instalación, Uso Y Mantenimiento

Following prolonged disuse, proceed as fol-
lows:
• Inspect the appliance thoroughly before
using it again.
• Allow electric appliances to operate at the
lowest temperature for at least 60 minutes.

INSTRUCTIONS FOR CLEANING

REMINDERS FOR CLEANING

The manufacturer will not be liable for
any damage or injury resulting from fai-
lure to observe the following rules.
• Disconnect the appliance electrical power
supply, if present, before proceeding with
any operation.
• Clean the satin finish stainless steel exte-
rior surfaces, the cooking wells and the
surface of the hotplates every day.
• At least twice a year, have an authorized
technician clean the internal parts of the
appliance.
• Do not use direct or high pressure water
jets or steam cleaners to clean the ap-
pliance.
• Do not use corrosive products to clean the
floor or shelf beneath the appliance.
• Do not wash the body or flame spreader of
the hob burners in the dishwasher.
SATIN FINISH STAINLESS STEEL SUR-
FACES
• Clean the surfaces with a cloth or sponge
using water and proprietary non-abrasive
detergents. Follow the grain of the satin fi-
nish. Rinse repeatedly and dry thoroughly.
• Do not use pan scourers or other iron
items.
• Do not use chemical products containing
chlorine.
• Do not use sharp objects which might
scratch and damage the surfaces.
10

INSTRUCTIONS FOR MAINTENANCE

REMINDERS FOR THE MAINTENANCE
TECHNICIAN
The manufacturer will not be liable for
any damage or injury resulting from fai-
lure to observe the following rules.
• Read this manual carefully. It provides im-
portant information for safe installation,
use and maintenance of the appliance.
• Disconnect the appliance electrical power
supply, if present, before proceeding with
any operation.
• Installation, conversion to a different type
of gas and appliance maintenance must
be carried out by qualified technicians au-
thorized by the manufacturer, in complian-
ce with current safety standards and the
instructions given in this manual.
• Identify the specific appliance model. The
model number is detailed on the packa-
ging and on the appliance data plate.
• The appliance must be installed in a well-
ventilated room.
• Do not obstruct any air vents or drains pre-
sent on the appliance.
• Do not tamper with appliance components.
CONVERSION TO A DIFFERENT TYPE
OF GAS
See Chapter " Instructions for installation ".

COMMISSIONING

Following installation, conversion to a diffe-
rent type of gas or any maintenance ope-
rations, check appliance operation. In the
event of any malfunction, consult the next
paragraph"Troubleshooting".
GAS APPLIANCES
Switch on the appliance as directed in the
instructions and reminders for use given in
Chapter " INSTRUCTIONS FOR USE " and
check:
• the gas supply pressure ( see next Para-
graph ).