Gas Hob; Replacing The Main Bur- Ner Nozzle; Replacing The Pilot Burner Noz- Zle; Commissioning - KBS C74GD Instrucciones Para Instalación, Uso Y Mantenimiento

To convert the appliance to the local gas
type, follow the instructions given in atable
T1 and carry out the steps below:
• Replace the main burner nozzle ( UM ).
• Adjust the main burner's air regulator to
distance A.
• Replace the pilot burner nozzle ( UP ).
• Adjust the pilot burner air flow ( if neces-
sary ).
• Replace the gas valve minimum nozzle (
Um ).
• Affix the adhesive tab indicating the new
type of gas used.The nozzles and adhe-
sive tabs are supplied with the appliance.

GAS HOB

12.0.1 REPLACING THE MAIN BUR-
NER NOZZLE
• Remove the control panel.
• Remove the panstand grids and burners
• Remove nozzle UM and replace it with the
one indicated in table T1.
• Retighten nozzle UM.
• Re-assemble all parts. For assembly, pro-
ceed in reverse order.
12.0.2 REPLACING THE MINIMUM
ADJUSTMENT SCREW
• Remove nozzle UM and replace it with the
one indicated in table T1.
• Retighten nozzle UM.
• Re-assemble all parts. For assembly, pro-
ceed in reverse order.
REPLACING THE PILOT BURNER NOZ-
ZLE
• Remove the control panel and internal
guards.
• Remove the 3 screws securing the venturi
to the hob and pull the venturi out by ap-
prox. 10 cm.
• Undo connector R.
• Remove nozzle UP and replace it with the
one indicated in table T1.
• Retighten the connector R. Re-assemble
all parts.
• For assembly, proceed in reverse order.
8
13

COMMISSIONING

See Chapter " INSTRUCTIONS FOR MAIN-
TENANCE".

INSTRUCTIONS FOR USE

REMINDERS FOR THE USER

The manufacturer will not be liable for
any damage or injury resulting from fai-
lure to observe the following rules.
• Read this manual carefully. It provides im-
portant information for safe installation,
use and maintenance of the appliance.
• Keep this manual in a safe place known to
all users so that it can be consulted throu-
ghout the working life of the appliance.
• Installation, conversion to a different type
of gas and appliance maintenance must
be carried out by qualified technicians au-
thorized by the manufacturer, in complian-
ce with current safety standards and the
instructions given in this manual.
• For after-sales service, contact technical
assistance centers authorized by the ma-
nufacturer and demand the use of original
spare parts.
• Have the appliance serviced at least twice
a year. The manufacturer recommends ta-
king out a service contract.
• The appliance is designed for professional
use and must be operated by trained per-
sonnel.
• The appliance is to be used for cooking
food as specified in the prescriptions for
use. Any other use is considered to be im-
proper.
• Do not allow the appliance to operate emp-
ty for prolonged periods. Only pre-heat the
oven just before use.
• Do not leave the appliance unattended
while in operation.
• In the event of an appliance fault or mal-
function, shut the gas shut-off valve and/or
switch the appliance off at the main switch
installed upline.