Important Safeguards - Russell Hobbs 20230-56 Instrucciones

Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all
packaging before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved.
Children must not use or play with the appliance.
Keep the appliance and cable out of reach of children.
To avoid injury, take care handling the blades, emptying the jug, and
cleaning.
h Don't add hot liquid (over 40°C), as it may be ejected due to sudden
steaming.
c Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don't leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its service
agent, or someone similarly qualified, to avoid hazard.
H Don't immerse the appliance in liquid.
• Switch off before fitting the jug to the motor unit.
• Switch off and wait till the blades come to a stop before removing the lid from the jug, or
removing the jug from the motor unit.
• Don't put utensils into the jug while the appliance is plugged in.
• Don't use accessories or attachments other than those we supply.
• Don't use the appliance for any purpose other than those described in these instructions.
• Don't operate the appliance if it's damaged or malfunctions.
• Don't run the motor continuously for more than 2 minutes, it may overheat. After 2 minutes
switch off for at least 2 minutes, to recover.
DIAGRAMS
1. Light
2. Motor unit
3. Speed control
4. Jug base
5. Blade unit
` dishwasher safe
ASSEMBLY
1. The jug, blade unit, and seal are packed together.
2. Sit the jug upside down, with the blade unit and seal in position.
3. Turn the jug base upside down and screw it on to the bottom of the jug. In use, treat the jug
and base as a single unit.
4. Sit the motor unit on a dry, firm, level surface, near a power socket.
Align the d on the bottom of the jug with the U on the motor unit.
5.
Lower the jug on to the motor unit, then turn the jug to align the d with the L.
6.
USING
1. Remove the lid.
2. Put the ingredients into the jug.
HOUSEHOLD USE ONLY
6.
7.
8.
9.
10. Cap
3
Seal
Jug
Handle
Lid