Glacier bay AO4-215177EW Manual Del Usuario página 5

ASSEMBLY INSTRUCTIONS
5. Install Tank (A), (Fig. 5)
• Attach rubber sealing gasket (HH) to center drain
hole under tank (A).
• Gently place tank (A) on toilet bowl (B) with bolts
protruding out underneath.
• Place oval metal washer (II) followed by wing nut
(JJ) onto the protruding bolt.
• Tighten wing nut (JJ) enough so that the tank (A)
sits flat on the toilet bowl (B).
• Make sure the toilet tank (A) is parallel to the wall
and straight on the toilet bowl (B).
• CAUTION: DO NOT OVERTIGHTEN NUTS.
SEVERE DAMAGE MAY OCCUR.
6. Connect the Water Supply Line, (Fig. 6)
• Connect the water supply line (not included)
between the tank (A) and shut-off valve.
• Tighten the tank connection coupling nut ¼ turn
beyond hand tight. (DO NOT OVERTIGHTEN
THE TANK CONNECTION.)
• Turn on supply valve and allow tank (A) to fill.
• Check for leakage at all connections and tighten
or correct as needed.
5
Fig. 5
A
B
Fig. 6