Sunstech uSUN200 Manual Del Usuario página 8

Turn on Bluetooth or set the phone so that it can be detected
1) Press home>menu,/settings.
2) Touch wireless and internet, then choose Bluetooth box to open
the Bluetooth function. After started, the status box will show this
). Touch "scan for devices"then it will starts to scan for all
icon (
devices within range.
3) Touch Bluetooth settings, all the devices found will display in the
list under the icon.
（select the box "can be detected", set it to be detected, the other
Bluetooth devices will be able to find the phone.）
important：the maximum detecting time of the phone is 2 minutes.
• Pairing and connection of Bluetooth headset
1) Press home>menu, then touch settings.
2)Touch wireless and internet>Bluetooth settings, then select
Bluetooth box, then your phone will scan for the Bluetooth devices
within range ,and show the founded devices in the list under the
icon.
• Tips：
a. If the list can't find your equipment, touch scanning equipment
to re-scan it.
b. Make sure that the devices wanted are under the detected
mode.
3) Touch headset in the equipment list to finish the connection.
• Notices：Generally Bluetooth devices need a password to be
paired, often use「0000」as the default password.4)The pairing and
connecting status will show under the headset in the Bluetooth
devices list. When The headset is connected to your phone, the
status box will show. This icon （ ） means you are connected. Then
you can use the headset to make or receive calls.
6