Remote Control Operation - Pinnacle Climate Remington REM-L180ALT-F Manual Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

MULTI-FUNCTION WIRELESS REMOTE CONTROL SYSTEM FOR OPERATING A LATCHING

SOLENOID VALVE, MANUALLY OR WITH A THERMOSTAT FUNCTION

WARNING

This remote control system was developed to provide a convenient, user-friendly, and safe remote control

system for gas heating appliances. The system is operated manually from the transmitter and operates on

radio frequencies (RF) within a 20-foot range using non-directional signals. The system uses one of over

a million security codes that are programmed into the transmitter at the factory. Before the first use, the

remote receiver's code must be matched to the transmitter's code.

NOTE: Review COMMUNICATION SAFETY under the GENERAL INFORMATION section. This safety feature

shuts down the appliance during potentially hazardous or unsafe conditions.

This remote control system provides you with a battery-operated remote control to power a latching solenoid

such as those used with gas valves in certain heater-rated gas logs, gas fireplaces, and other gas heating

appliances (see Fig. 33).

Using the battery power from the receiver, the solenoid

circuit operates a solenoid. The circuit uses reversing polarity

software to reverse the positive (+) and negative (-) output of

the receiver's battery power, which drives a latching solenoid

ON/OFF. The system is controlled by the remote transmitter,

which operates on two (2) 1.5 V AAA batteries.

Always use alkaline batteries for longer battery life and

maximum performance. Do not use rechargeable batteries.

Before using the transmitter, place the two (2) AAA batteries

in the battery compartment. Ensure the batteries are placed in

the proper direction.

OFF

MODE

SET