Installation Procedure - Xerox Phaser 5335 Guia De Instalacion

Installation Procedure

1. Switch the power off by pressing the power
switch located on the front lower right of the
printer to the <O> position.
Unplug the power cord from the power
outlet and the printer.
2. If paper is loaded in the Tray 1 (Bypass
tray), remove the paper.
If Tray 1 is not open, open the tray.
3. Open the upper cover.
4. Remove the cap from the connector on the
left inside the printer.
Note
• Keep the cap safe and handy.
5. Insert the duplex unit A into the printer from
the front of the printer, sliding the duplex
unit A along the guides inside the printer.
Push in the duplex unit A until it stops.
2
guide