Hoover PORTAPOWER CH30000 Manual Del Usuario página 5

NOTICE
For models rated 9.5 A (see data label on bottom of unit for rating):
A THERMAL PROTECTOR HAS BEEN DESIGNED INTO YOUR CLEANER
TO PROTECT IT FROM OVERHEATING. WHEN THE THERMAL
PROTECTOR ACTIVATES THE CLEANER WILL STOP RUNNING.
If this happens proceed as follows:
1. Turn cleaner OFF and unplug it from the electrical outlet.
2. Check fullness of bag, change if needed.
3. Inspect the nozzle inlet, hose connector, hose, bag inlet and secondary filter for any obstructions. Clear
obstructions if present.
4. When cleaner is unplugged and motor cools for 30 minutes, the thermal protector will deactivate and
cleaning may continue.
If the thermal protector continues to activate after following the above steps,
your cleaner needs servicing.
For models rated 7.5 A (see data label on bottom of unit for rating):
A THERMAL PROTECTOR HAS BEEN DESIGNED INTO YOUR CLEANER
TO PROTECT IT FROM OVERHEATING. WHEN THE THERMAL
PROTECTOR ACTIVATES THE CLEANER WILL STOP RUNNING.
If this happens proceed as follows:
An auto reset thermal protector has been designed into your cleaner to protect it from overheating. When
the thermal protector activates the cleaner suction motor will stop running.
If the vacuum stops running proceed as follows:
1. Turn cleaner OFF and unplug it from the electrical outlet. IMPORTANT: If left plugged in and turned
on, the cleaner motor may start unexpectedly.
2. Check fullness of bag, change if needed.
3. Inspect the nozzle inlet, hose connector, hose, bag inlet and secondary filter for any obstructions. Clear
obstructions if present.
4. After the motor cools for 30 minutes, the thermal protector will deactivate and cleaning may continue.
Plug the cleaner back into the electrical outlet.
If the thermal protector continues to activate after following the above steps your cleaner needs
servicing.
If the thermal protector continues to activate after following
the above steps, your cleaner needs servicing.
5