Oreck POD BK51700 Serie Guia Del Usuario página 12

ASSEMBLY: ATTACH TOOLS
Tools will "snap" into place
when properly installed.
Ensure that a tool is
installed prior to operating
vacuum.
Press snap-fit tool
buttons.
Slide tool into nozzle
opening with snap-fit tool
buttons still pressed.
Both buttons should click
into place before use.
To remove, press snap-fit tool
buttons and pull tool out of
nozzle opening.
11
Snap-fit tool buttons
ASSEMBLY: ATTACH WAND & FLOOR NOZZLE
Press snap-fit tool buttons
on wand and insert into
Handheld unit.
Line up the wand with the
AirPower™ floor nozzle. Slide
wand into nozzle opening
with snap-fit tool buttons
pressed to attach. Ensure
that wand end with large
cap joins with floor nozzle.
To remove, press snap-fit tool
buttons and pull tool out.
Not to be used for grooming a pet.
IMPORTANT
!
This vacuum cleaner is not free standing. In between
IMPORTANT
!
uses or when carrying out any maintenance, always lay flat on the floor in a
suitable location so it does not become a trip hazard or can be stepped on.