Specific Safety Rules - Stanley FatMax FME140 Manual De Instrucciones

f) Dress properly.Do not wear loose clothing or jewelry.Keep your hair,clothing and gloves
control of the power tool in unexpected situations.
g) If devices are provided for the connection of dust extraction and collection facilities,ensure
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
these are connected and properly used. Use of dust collection can reduce dust-related hazards.
a) Do not force the power tool. Use the correct power tool for your application. The correct
4) POWERTOOL USE AND CARE
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
power tool will do the job better and safer at the rate for which it was designed.
c) Disconnect the plug from the power source and/or the battery pack from the power
cannot be controlled with the switch is dangerous and must be repaired.
tool before making any adjustments, changing accessories, or storing power tools. Such
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar
preventive safety measures reduce the risk of starting the power tool accidentally.
with the power tool or these instructions to operate the power tool. Power tools are
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts
dangerous in the hands of untrained users.
and any other condition that may affect the power tool's operation. If damaged, have the power
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
tool repaired before use. Many accidents are caused by poorly maintained power tools.
g) Use the power tool, accessories and tool bits, etc. in accordance with these instructions,
edges are less likely to bind and are easier to control.
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
• Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.

SPECIFIC SAFETY RULES

• Use auxiliary handle(s) if supplied with the tool. Loss of control can cause personal injury.
• Hold power tool by insulated gripping surfaces when performing an operation
where the cutting accessory may contact hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
• Use clamps or another practical way to secure and support the work piece to a
stable platform. Holding the work by hand or against your body leaves it unstable and
may lead to loss of control.
• When not in use, place tool on its side on a stable surface where it will not cause
a tripping or falling hazard. Some tools with large battery packs will stand upright but
may be easily knocked over.
• Keep your hair, clothing, and gloves away from air vents. Air vents often cover
moving parts in which these items can be caught.
• Hold tool firmly with two hands, one hand on the handle, and the other gripping the
bottom around the battery area. Use auxiliary handle if provided. Loss of control can
cause personal injury.
WARNING:
ALWAYS use safety glasses. Everyday eyeglasses are NOT safety
glasses. Also use face or dust mask if drilling operation is dusty. ALWAYS WEAR
CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CPA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NOSH/OSHA respiratory protection.
3