DeFelsko PosiTector PC Guía Rápida página 14

Powder Probes
Displays menu options that enable the PosiTector body to
communicate with wireless PosiTector PC probes.
List
Displays all previously connected PC probes.
Change Order
Select which PC probe the PosiTector body will connect to first
during power-up.
Add New
Allows PosiTector body to pair with a wireless PC probe for
the first time.
1
When selected, the PosiTector body will display, "Ensure
probe is turned on and in reset state before continuing!"
Refer to Full Guide for Probe RESET instructions at
www.defelsko.com/manuals 2
Select Next. The PosiTector body will search for available
PC probes.
3
Select the PC Probe to connect. PC Probes are displayed
by their serial numbers.
Probe Off
Disconnects PC probe from PosiTector body and causes the PC
probe to power off. If a physically connected probe is attached,
the PosiTector will automatically recognize it.
Connect
Allows PosiTector body to connect to or switch between
wireless PC probes and physically connected probes. PC
probe must be turned on.
Updates
Determines if a software update is available for your Gage.
See www.defelsko.com/update
WARNING:
(see pg 9).
The Gage may perform a Hard Reset after an update
13