Description Of Symbols; Environmental Protection - Silverline 870944 Traducción Del Manual Original

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information
necessary for safe and effective operation of this product. This product has
unique features and, even if you are familiar with similar products, it is necessary
to read this manual carefully to ensure you fully understand the instructions.
Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction Manual
Caution!
Class II construction (double insulated for additional protection)
Conforms to relevant legislation and safety standards

Environmental Protection

Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for recycling advice
Technical Abbreviations Key
V
~ , AC
A, mA
Ah
n
o
°
Ø
Hz
W, kW
/min or min
-1
dB (A)
m/s 2
4
Volts
Alternating current
Ampere, milli-Amp
Amp hours (battery capacity)
No load speed
Degrees
Diameter
Hertz
Watt, kilowatt
(revolutions or reciprocation) per minute
Decibel sound level (A weighted)
Metres per second squared
(vibration magnitude)
Original Instructions
Specification
Input voltage: ..............................................................230-240V~ 50Hz
Power: ..........................................................................................240W
No load speed: ...................................................................12,000min
Sanding disc attachment: .................................................. Hook & Loop
Sanding disc size: .............................................................Ø125mm (5")
Oscillating diameter: ......................................................................2mm
Protection class: .............................................................................
Power cord length: ......................................................................1.83m
Weight: ...................................................................................... 1.12kg
As part of our ongoing product development, specifications
of SILVERLINE products may alter without notice.
Sound and vibration information:
Sound pressure L : ................................................................76.0dB(A)
PA
Sound power L : ...................................................................87.0dB(A)
WA
Uncertainty K: ..................................................................................3dB
Weighted vibration a : ............................................................4.315m/s
h
Uncertainty K: ............................................................................1.5m/s
The sound intensity level for the operator may exceed
85dB(A) and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable, even
with ear protection, stop using the tool immediately and check the ear protection is
correctly fitted and provides the correct level of sound attenuation for the level of
sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to a
chronic condition. If necessary, limit the length of time exposed to vibration and
use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures
provided in the specification relating to vibration to calculate the duration and
frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
EN60745 or similar international standards. The figures represent normal use for
the tool in normal working conditions. A poorly maintained, incorrectly assembled,
or misused tool, may produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods
of time.
-1
2
2