Cleaning And Maintenance; Technical Data; Cleaning The Impeller - Master Pumps MPC401-S Manual Del Usario

This appliance cannot be used by children or
people who are physically, mentally or
developmentally impaired, or people who lack
experience or knowledge, except in case
these people receive instruction from a person
responsible for their safety, a supervisor, or by
studying the preceding instructions concerning
use of this appliance.

8 CLEANING AND MAINTENANCE

Attention ! Before performing any
work on the equipment, pull the
Never use solvents such as
petrol, alcohol, ammonia water,
etc. These solvents may damage
the plastic parts.
8.1 Maintenance guidelines
This submersible pump is an approved,
maintenance-free high quality product, which is
subject to severe final controls. We recommend
regular inspection and maintenance to ensure
long equipment life and uninterrupted operation.
Important ! Note!
Remove the mains plug before all
maintenance work.
_ When the pump is often transported in the course
of operation, it should be cleaned out with
clear water after every use.
_ All fibrous particles which may have built-up inside
the pump housing should be removed
with a water jet.
_ Every 3 months the shaft ground and as should be
cleaned from mud.
_ Remove deposits on the floater with clear water.

8.2 Cleaning the impeller

If excessive deposits collect in the pump case you
must dismantle the bottom part of the pump
as follows:
1. Remove the intake cage from the pump case.
2. Clean the impeller with clear water.
Important! Do not put down or
rest the pump on the impeller!
3. Re-assemble in reverse order
power plug.

9 TECHNICAL DATA

MPC401-S
Voltage / frequency
Power input
Delivery rate max..
Delivery height max
Immersion depth max. max.
Water temperature max.
Hose connection
Foreign bodies up to
Switching point high: ON ca.
Switching point high: OFF ca.
For
Housing (plastic(P) / Stainless Steel (SS) )
Water inlet (plastic(P) / Stainless Steel (SS) ) PP
Weight
MPS551-S
Voltage / frequency
Power input
Delivery rate max..
Delivery height max
Immersion depth max. max.
Water temperature max.
Hose connection
Foreign bodies up to
Switching point high: ON ca.
Switching point high: OFF ca.
For
Housing (plastic(P) / Stainless Steel (SS) )
Water inlet (plastic(P) / Stainless Steel (SS) ) PP
Weight
MPS751I-S
Voltage / frequency
Power input
Delivery rate max..
Delivery height max
Immersion depth max. max.
Water temperature max.
Hose connection
Foreign bodies up to
Switching point high: ON ca.
Switching point high: OFF ca.
For
Housing (plastic(P) / Stainless Steel (SS) )
Water inlet (plastic(P) / Stainless Steel (SS) ) PP
Weight
13
230-240V ~ 50Hz
400W
7000 l/h
8 m
8 m
35° C
5/4"
5 mm
55 cm
5 cm
Clean water
PP
4,2 kg
230-240V ~ 50Hz
550W
10000 l/h
7 m
8 m
35° C
5/4"
35 mm
55 cm
5 cm
dirty water
PP
5,0 kg
230-240V ~ 50Hz
750W
13000 l/h
8 m
5 m
35° C
5/4"
35 mm
55 cm
5 cm
dirty water
SS
5,3 kg