Activating The Onetouch Light; Using The Onetouch Light; Replacing Batteries In The Onetouch Light - SentrySafe HD4100L Manuel Del Dueño

2

Activating the OneTouch Light:

Remove the light from its packaging- Do not remove adhesive tape label
1
from the back of the OneTouch light unit.
Detach the light from its base by sliding the silver light upward in the
2
unlock position as indicated on light.
Pull the clear plastic tag from the back panel of the silver light unit.
3
Replace the black base by lining up the prongs on the base with the
4
holes in the bottom of the silver light. Slide the silver light into the locked
position as indicated on the side of the unit.
Place the OneTouch Light in the slot of the safe lid by sliding the unit
5
downward into the slot.
4
3

Using the OneTouch Light:

Press black button on interior lighting unit to turn light on and off.
1
IMPORTANT
Interior light will NOT automatically turn off when safe is closed. To
preserve the life of the batteries turn off the OneTouch Light before
closing the safe.
4

Replacing Batteries in the OneTouch Light

Remove the OneTouch Light from inside lid by sliding unit upward.
1
Detach the black base of the unit by sliding the silver light unit upward in
2
the unlock position as indicated on light.
Open battery compartment by pushing downward on the tab and pulling off.
3
Insert two cell batteries (CR2032 Lithium 3V).
4
Slide battery compartment cover into the back of the silver light unit and
5
click into place.
5