Cramer 40PHA Traducción De Las Instrucciones Originales página 2

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
40PHA
Voltage
No load speed
Blade speed
Blade length
Cutting capacity
Measuered sound
pressure level
Guaranteed sound power
level
Vibration level
Weight without battery
pack
Battery
Battery charger
DESCRIPTION
See figure 1.
1. Blade
2. Hedge Trimmer Head
3. Coupler
4. Safety Lock Button
5. On/Off Switch
6. Main Handle
7. Battery Compartment
8. Battery Release Button
9. Battery
10. Pivoting Button
11. Blade Cover
ASSEMBLY
UNPACKING
„ This product requires assembly.
„ Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
„ Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
„ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
English (Original instructions)
40V
-1
3000 (±10%) min
-1
3000 (±10%) min
510 mm
18 mm
80 dB (A), k=3.0
99 dB (A)
<2.5 m/s², k=1.5 m/s²
3.84 kg
40V110 / 40V220
40C120 / 40C60
PACKING LIST
„ Hedge Trimmer Head
„ Extension Tube
„ Handle Pole
„ Blade Cover
„ Operator's Manual
Do not insert the battery until assembly is complete.
Failure to comply could result in accidental starting
and possible serious personal injury.
FITTING THE HEDGE TRIMMER HEAD
See figure 2.
The hedge trimmer head (1) can be mounted directly
into handle pole (2) so as to achieve the standard
length.
1. Insert the handle pole (2) into the hedge trimmer
head (1).
2. Slide the collar (3) upwards and turn it clockwise
until it is completely tightened.
EXTENSION OF POLE HEDGE TRIMMER
See figure 3.
The maximum reach can be achieved by fitting the
extension tube (4) between the handle pole (2) and the
hedge trimmer head (1).
„ Slide the collars (3) up and rotate it clockwise until it
is completely tightened.
Periodically check the connections to ensure that
they are tightened securely.
REMOVING THE HEDGE TRIMMER HEAD / HANDLE
POLE
See figure 4.
„ Rest pole hedge trimmer on the ground, loosen
the coupler (3), then take off the trimmer head (1)
/ handle pole (2).
OPERATION
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
1
WARNING
WARNING
WARNING