Remote Control - Best IC34 Serie Manual Del Usuario

OPERATION
Controls (Fig.1)
The hood is operated using the (5) push buttons located on the front edge of the hood. The
Light On/Off buttons turn the lights on and off .
The Blower Off / - button decreases the blower speed each time pressed. Depress and
hold the button for 2 seconds to turn the blower off .
The Blower On /+ button turns the blower on and increases the blower speed each time
pressed. There are four diff erent speed settings: Low, Medium-Low, Medium-High and
High.
The Blower LED Indicators illuminate to indicate the selected blower speed.
The Delay button activates the delay-off feature. When the blower in on and the button
is pushed, the blower will continue to operate at the current speed setting for 10-minutes
before automatically turning itself off . The LED (on the right) fl ashes during operation.
The LED (on the right) is also used as a fi lter clean reminder. It will fl ash after 30 hours of
operation - indicating the need to clean the fi lters.
The Filter Clean Reset button is used to reset the 30-hour fi lter timer. After fi lters are
cleaned or replaced, press button once to reset the fi lter clean alarm.
HEAT SENTRY™
Your hood is equipped with a HEAT SENTRY™ thermostat. This thermostat is a device that
will turn on or speed up the blower if it senses excessive heat above the cooking surface.
1) If blower is OFF - it turns blower ON to HIGH speed.
2) If blower is ON at a lower speed setting - it turns blower up to HIGH speed.
When the temperature level drops to normal, the blower will return to its original setting.
WARNING
The HEAT SENTRY thermostat can start the blower even if the hood is turned OFF.
When this occurs, it is impossible to turn the blower OFF with its switch. If you
must stop the blower, do it from the main electrical panel.

REMOTE CONTROL:

An optional ACR Series remote control (purchase separately) can be used to operated
the range hood.
- 6 -