Canyon Sandy KW-34 Guía Rápida página 3

intRoDUction
Dear customer, thank you for choosing Canyon kids watch! KW-
34 will help you in caring on your kid – it's support 2-way calls,
GPS location, a lot of features to track the child and it's harder
to lose or break. More of all, your kid will like it because of
useful tools and game! Please read this Guide carefully prior to
use, that you may start to use the device quickly and correctly.
1. pRepaRation BefoRe UsinG
1.1 Charge the device before use.
Plug Micro-usb side of the USB-cable into
the power connector of the watch and
the other side to a power source (power
source parameters: DC 5V 1A). For better
charging compatibility, it is advisable to
use a Power Bank or wall charger
produced by Canyon.
The charging process should be indicated
at the screen. Full charging indicates by
the following icon:
1.2 Check that all the accessories are included
(smartwatch, user manual, USB cable, label with
registration code).
1.3 Choose the 2G Nano-SIM card which matches
your GSM network, as recommended by your
dealer (Turn the watch off before you insert the
EN EN
Nano-SIM card). Disable PIN code request of your SIM-card.
Please check that the Nano-Sim card is activated, there
is available credit, 2G data transmission is supported and
activated.
1.4. Open the battery cover and remove the battery, install
Nano-SIM card as the pic shows.
1.5. Press and hold Power/SOS key to turn on the device
Note. After successful registration in Canyon Life APP, turning
off the watch in normal usage mode is possible only from APP.
So the kid can't turn it off to hide his location position. But
anyway there're ways how to turn it off (low battery, remove
battery, GSM signal is absent)