Tabla de contenido
Idiomas disponibles
Idiomas disponibles
• Take up the jug kettle from the base before filling.
• To fill the jug kettle, open the cover by press the lid button downwards, then fill to the desired level (min
0.5L-Max.1.5L), close the lid by pressing it down until it clicks into place.
• Plug the power supply cord into the main, press the On/Off switch down, the power indicator lights up.
• When the water has boiled the kettle will automatically switch itself off, you can stop the boiling process at
any time by lifting the On/Off switch. The power indicator will go out.
• Avoid using abrasive cleaning agents.
• Empty the kettle and allow to cool, open the lid lift out the filter, rinse the filter under warm water and brush
off any impurities.
• Refitting is the reverse of removal
Descaling
Half fill the kettle with tap water and add the juice of 1 lemon to the water. Boil this mixture and allow it to stand
for 15 minutes. Re-boil the mixture and allow it to stand a further 15 minutes. Re-boil this mixture a third time
then rinse the kettle well.
According to the European waste regulation 2012/19/EU this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailled information about recycling of this product, please contact your local council or your
household waste disposial service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
7
Use and Operation
Cleaning and Care
Hints on Disposal
Declaration of Conformity
Tabla de contenido
