TROUBLESHOOTING
What happened
Camera will
not operate
Film does not
advance or rewind
LCD panel is blank
Flash/camera ready
lamp "blinks" red
Flash/camera ready
lamp glows red and
shutter button locks
Film door does
not open
Probable cause
Battery weak, dead, missing,
or improperly loaded
Battery weak, dead, missing,
or improperly loaded
Battery weak, dead, missing,
or improperly loaded
Camera in sleep mode
Lens cover/flash closed
Flash not fully charged
Camera movement
Subject beyond the flash range
Subject between 8 in (20 cm)
and 2 ft (0.6 m) from camera
Film cassette loaded in
film chamber
Solution
Replace or reload
the battery
Replace or reload
the battery
Replace or reload
the battery
Press mode-selector
button or close and
reopen lens cover/flash
Open lens cover/flash
Wait for lamp to
glow green
Hold camera steady
Move closer to subject
Move back and
recompose picture
Press the mid-roll-change
button. See Mid-roll-
change (MRC) on
page 27 or continue
taking pictures
29