Caracteristiques Techniques - Skil 0511 Manual Original

página de 125

/ 125
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

• Do not subject the measuring tool to extreme temperatures or variations in

temperature (the accuracy of the measuring tool can be impaired)

as an example, do not leave it in vehicles for long time

allow the measuring tool to adjust to the ambient temperature before putting it

into operation

• Avoid heavy impact to or falling down of the measuring tool

damage to the measuring tool can impair its accuracy

after heavy impact or shock, compare the laser lines with a known horizontal or

vertical reference line

• Push switch F 1 into locking position 6 when transporting the measuring tool

(this locks the levelling unit, which can be damaged in case of intense movement)

• Keep the measuring tool clean at all times

• Do not immerse the measuring tool in water or other fluids

• Wipe off debris using a moist and soft cloth

• Do not use any cleaning agents or solvents

• Regularly clean the surfaces at the exit opening of the laser in particular, and pay

attention to any fluff of fibres

• If the tool should fail despite the care taken in manufacturing and testing

procedures, repair should be carried out by an after-sales service centre for SKIL

power tools

send the tool undismantled together with proof of purchase to your dealer or

the nearest SKIL service station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

• Do not dispose of electric tools, batteries, accessories and packaging

together with household waste material (only for EU countries)

in observance of European Directive 2012/19/EC on waste of electric and

electronic equipment and its implementation in accordance with national law,

electric tools that have reached the end of their life must be collected separately

and returned to an environmentally compatible recycling facility

symbol 4 will remind you of this when the need for disposing occurs

Laser croix

INTRODUCTION

• L'outil de mesure est conçu pour déterminer et vérifier des lignes horizontales et

verticales

• L'outil de mesure est exclusivement conçu pour fonctionner dans des locaux

fermés

• Cet outil n'est conçu pour un usage professionnel

• Conservez ces instructions dans un lieu sûr et remettez-les à tout nouvel

utilisateur de l'appareil de mesure