Fasten the child into the child seat for group 1
• With the harness open, place your child into the child seat. Place the shoulder straps
your child's shoulders.
• The headrest is adjustable
the head of the child lies perfectly in the middle of the headrest
• Fasten the buckle
the buckle until your hear a click.
• Make sure that the shoulder pads
straps
by tightening the harness adjustment strap
R
securely fastened in.
Usage of the cild seat in group ii + iii
remove the harness for group 2 + 3
• Remove the back lid on the backside of the child seat by pulling out four plastic screws on the
sides of the back lid.
• From behind the seat, unhitch the harness straps from the yoke
through to the front of the seat.
the front of the seat.
• Remove the belt tongues and then you can pull out the belt completely out of the seat.
• Remove the seat plate from the bottom of the seat and take the seat belt lock out of the bottom
part.
Then press the seat back in place.
16
• Mount the back lid with four plastic screws on the sides of the child seat.
Fasten the child into the child seat for group 2 with headrest.
• Place the seat on the vehicle seat, ensuring it's backrest
seat and has not to be bent backward.
• Place your child into the child seat.
• Thread the diagonal belt in the side belt notches
The lap belt goes both sides through the belt notches
17
• Insert the lap and diagonal belt into the seat belt buckle. You will hear a click when it is correctly
inserted. Pull on it to check it is securely fitted.
11
. Adjust the headrest by pushing the headrest up or down so that
B
by bringing together the two prongs of the harness strap
D
13
sit correctly on the child's shoulders. Tighten the shoulder
L
14
3
Untie the shoulder pad cords
6
7
17
. Your child must be comfortable but
H
be placed firmly against the vehicle
A
and pull it alongside the backrest of the seat.
N
.
E
– 11 –
.
12
and push into
R
and pull the straps
S
5
and pull these through to
L
over
R
15