Tabla de contenido
Backing
1. Preparation
Install the water supplies and drain piping. Install the supply
stops so the handles will not touch the pedestal when fully open.
Install sufficient backing behind the finished wall to provide
secure material for the anchoring devices.
Place the pedestal in the approximate location.
Carefully lift the lavatory into place on the pedestal, and slowly
move the pedestal as required to ensure proper fit.
NOTE: The lavatory must be supported by the pedestal.
Hold the brackets in place under the lavatory, and mark the
bracket hole locations on the finished wall.
Carefully remove the lavatory from the pedestal and set aside.
Move the pedestal from the area.
1008427-2-C
Mark the mounting
hole locations.
Bracket
6
Kallista
Tabla de contenido
