Safety Information - SMA SUNNY TRIPOWER 15000TL Instrucciones Breves

Ocultar thumbs Ver también para SUNNY TRIPOWER 15000TL:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
SMA Solar Technology AG
3 Safety Information
Danger to life due to electric shock
When exposed to sunlight, the PV array generates dangerous DC voltage, which is present in the
DC conductors and the live components of the inverter. Touching the DC conductors or the live
components can lead to lethal electric shocks. If you disconnect the DC connectors from the
inverter under load, an electric arc may occur leading to electric shock and burns. This manual is
intended only for electrically qualified persons trained in the installation and commissioning of
electrical devices and installations and experienced in mounting and commissioning PV systems.
In addition, you can find a detailed installation manual at www.SMA-Solar.com
• Work on the inverter must only be performed by electrically qualified persons.
• Do not touch the DC conductors or any other uninsulated conductors.
• Before performing any work on the inverter or PV array, always disconnect the inverter from
voltage sources in the following sequence. Only after the final step has been completed, is
there no voltage present in the inverter.
4 Installation
Carry out the actions illustrated graphically in this document in the specified order and observe all
information.
You can find a detailed operating manual for installation, commissioning and
configuration as well as a service manual for troubleshooting at www.SMA-So-
lar.com.
Quick Reference Guide
Risk of burns due to hot surfaces
The product can get hot during operation. Avoid contact during operation.
Allow the product to cool down sufficiently before carrying out any work.
Danger to life due to high voltages in the inverter; observe a wait-
ing time of 20 minutes
High voltages that can cause lethal electric shocks are present in the live
components of the inverter. Always disconnect the inverter from voltage
sources before performing any work on it.
Operation of the display (optional) by tapping
Tapping once: switching on the display light, switching to the next text line
Tapping twice: displaying all messages of the start-up phase (e.g. serial
number, firmware version)
Read the DC connector manual
Reference to detailed information in the installation manual of the DC con-
nectors (see scope of delivery or www.SMA-Solar.com).
3 Safety Information
STP15-25TL-30-IS-en-hu-12
3
Tabla de contenido
loading

Tabla de contenido