RECARO C 6000 Manual De Montaje página 38

Important note:
The adapter has two parallel hole patterns. Select the drilled holes in such a way that after the
seat is fitted sufficient space exists for the operation of the adjusting elements.
You must ensure that you use M10 screws, with a minimum head diameter of 17.5mm (SW17),
minimum strength class 10.9 and appropriate bolt adhesive (e.g. Loctite).
The length of the screw must be selected in such a way that at least two threads stand out above
the nut in a screwed-down condition.
Warning!
If the screw length is too short, the screws will work loose whilst you are driving. The risk of an
accident and being injured whilst driving exists in such a case.
3. Tightly screw the adapter with the U-shaped profile (3) and the two washers (4) with suitable screws (1,
2) and appropriate bolt adhesive using the stipulated torque.
Torque: M10 screws: 45 Nm ± 2 Nm
RECARO Automotive Seating Seite 13