Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly Instructions
CART INSTALLATION INSTRUCTION
INSTALLATION INSTRUCTIONS
WARNING
All wiring must be installed by a certified
electrician in accordance with electrical
safety standards.
All wiring procedures and connections must be in
accordance with national and local codes.
Prior to installation:
Disconnect the main supply connection.
The heater must be connected to individual rated branch circuit
breaker only. (See spec sheet).
Use proper conductor size for power supply. (See spec sheet).
653565 CONTENTS
Part Qty.
Part
Qty.
1
1
Axle
2
1
Handle
1
1
3
2
Foot Stand
2
1
4
2
Wheel
3
2
5
2
Bushing
4
2
6
2
M12 Nut
7
4
12mm ID Washer
5
2
8
4
M8 Nut
6
2
9
8
8mm ID Washer
7
6
10
4
M8 x 80 Screw
8
4
11
2
M6 x 55 Screw
9
8
12
2
6mm ID Washer
13
10
2
4
M6 x 20 Nut
14
2
Knob
15
2
10mm ID Washer
16
2
50 x 10mm Rubber Pad
2
3
4
5
6
7
7
Use axle (1), bushing (5) and 12mm ID
2.Use axle (1), bushing (5) and 12mm ID washer (7)
washer (7) to assemble foot stand (2)
to assemble foot stand (3) and wheels (4).
and wheels (4).
Electric Blower Heater
Salamander Heater
CONTENTS
Description
Description
Axle
Handle
Foot Stand
Wheel
Bushing
M12 Nut
12mm ID Washer
M8 Nut
8mm ID Waher
M8 x 80 Screw
1
7
7
CAUTION
Keep electrical cords, drapery,
furnishings and other combustibles
at least 3 feet (0.9 m) from heater,
WARNING
To reduce the risk of fire, do not store or
use gasoline or other flammable vapors
and liquids near the heater.
1
1
1.Open package and remove heater and
Open package and remove heater and
assembly components.
assembly components.
3
4
5
2
7
7
6
3
3. Tighten M12 nuts (6) to wheels.
Tighten M12 nuts (6) to wheels.
5
to prevent risk of fire.
14
15 16
9
12 13
11
8
5
6
7
3
4
User's Manual
2
10
Tabla de contenido
