Casals VT50REA Manual Del Usuario página 6

speed, working life of the appliance will be
reduced considerably.
Drilling, Driving and Impact Drilling:
Drilling and driving
- Shift button (E) to the area marked by
Impact drilling
- Shift button (E) to the area marked by
Use:
- Connect the appliance to the mains.
- Select the appliance function desired.
- Select the desired speed.
- Turn the appliance on, by using the on/off
button
Locking button:
- To activate this function press button (C)
while holding down the start-up switch.
- To deactivate this function press the
start-up switch right down.
Once you have finished using the
appliance:
- Stop the appliance by releasing the on/off
switch.
Cleaning
- Disconnect the appliance from the mains
and allow it to cool before undertaking any
cleaning task.
- Clean the electrical equipment and the
mains connection with a damp cloth and dry.
DO NOT IMMERSE IN WATER OR ANY OTHER
LIQUID.
- Clean the equipment with a damp cloth
with a few drops of washing-up liquid and
then dry.
- Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
- Do not let water or any other liquid get into
the air vents to avoid damage to the inner
parts of the appliance.
- Never submerge the appliance in water or
any other liquid or place it under running
water.
- If the appliance is not in good condition
of cleanliness, its surface may degrade
and inexorably affect the duration of the
appliance's useful life and could become
unsafe to use.
Supplies
- Always use original supplies, designed
specifically for your appliance model.
- These supplies are available in specialist
shops.
Anomalies and repair
- Take the appliance to an authorised
technical support service if a product
damage or other problems arise. Do not try
to dismantle or repair without assistance, as
this may be dangerous.
- If the connection to the mains has been
damaged, it must be replaced and you should
proceed as you would in the case of damage.
Specifications:
VT50REA / VT50REAM
- Rated power:
- Rated Voltage:
- Rated Frequency:
- No load Speed:
- Electronic speed control:
- Maximum capacity in Steel:
- Maximum capacity in Wood:
- Maximum capacity in Concrete:
- Weight:
- Acoustic pressure level:
- Vibration:
- Not
flam
with
NB: T
to ch
impr
For E
is req
Ecol
prod
- The
of th
a col
syste
use t
each
- The
of su
harm
- Thi
oil. R
regu
type
Impact Drill
500W
230-240V~
50Hz
0-3000 rpm
Yes
10 mm.
25 mm.
13 mm.
1.5 Kg
< 101dB(A)
< 9.3 m/s2