Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
Before you begin cleaning
WARNING: Always switch off the vacuum cleaner before connecting or disconnecting the lift off
canister/ hose/attachments or removing and emptying the dirt cup.
NOTICE:
A Thermal Protector has been designed into your cleaner to protect it from overheating.
When the thermal protector activates the cleaner will stop running. If this happens
proceed as follows:
1. Turn cleaner OFF and unplug it from the electrical outlet.
2. Empty the dirt cup.
3. Inspect the nozzle inlet, hose connector, hose, dirt cup inlet, pre-motor filter, and HEPA
filter for any obstructions. Clear obstructions if present.
4. When cleaner is unplugged and motor cools off for 30 minutes, the thermal protector
will deactivate and cleaning may continue.
If the thermal protector continues to activate after following the above steps, your cleaner
needs servicing.
For best cleaning results, filters should be tapped over a bin every 4-6 uses to remove dirt and debris
and washed every 3 to 6 months (depending on the level of use).
Assembling your upright
Place the lift off canister
onto the spine and nozzle.
Store Pet Hair tool on the
side of the vacuum.
In a hinge like manner
push the lift off canister
backwards until it clicks
into place.
Getting started
Push the handle with
extension wand into the
spine of the vacuum
cleaner. The handle will
click into position when
correctly fitted.
Place the 2-in-1 tool
onto the storage clip.
Capítulos
Tabla de contenido
