Preparation; Charging - Aesculap Akkurata GT405 Traducción Del Manual Original

When the rechargeable battery has been removed, do
not connect the trimmer to the power cord 11 or
place the it in the charging unit 8 that is connected
to the mains. Either action can damage the electronic
system.

3. Preparation

3.1 Charging

Before connecting the trimmer to a power outlet, ve-
rify that the voltage stated on the rating plate is com-
patible with the power supply.
The appliance as supplied is not yet ready for operation
with the rechargeable battery. However, you can use the
trimmer immediately on mains power (see "Mains oper-
ation" on page 16).
The appliance should be charged for 2 hours before
being used for the first time without the cable.
It is not possible to "overcharge" the appliance.
14
Before charging the trimmer for
the first time, remove charging
unit 8 from comb attachment
holder 9.
Check that the mains voltage
agrees with the voltage specified
on the rating plate (on mains
adapter 10).
Plug the power cord 11 into the
charging unit and mains
adapter 10 into a wall socket.
Place the charging unit on a flat
surface.
Place the appliance in the charg-
ing unit.
The charging indicator 6 shows the
charging status. It has 5 segments,
each representing about 20 % of
the capacity of the rechargeable
battery.