4. Swing the showerhead to the left over the brew
basket. Note if you forget to position correctly,
the reservoir lid will automatically position the
showerhead when closed.
5. Fill the decanter with tap water to desired
capacity as marked on the side of the decanter.
(1 cup equals 5 ounces) Pour the water into the
reservoir. Close the reservoir lid completely and
place the empty decanter onto the warming
plate.
6. A convenient water level window is positioned
on the right side of the coffeemaker reservoir.
The red ball will rise within the water tube and
will indicate approximately how many cups of
water have been poured into the reservoir.
7. Turn your coffeemaker switch ON. The switch
body will glow red indicating the unit is on.
When coffee stops flowing, the brewing cycle is
complete.
8. Allow the brew basket to cool for a few minutes,
open the reservoir lid and swing the showerhead
to the right. Carefully remove the filter basket
and discard the used coffee grounds and filter.
Rinse the filter basket and replace.
9. To make another pot of coffee, repeat steps
1 through 8.
10. Be sure to turn your coffeemaker OFF (the
switch will no longer grow red) when the
decanter is empty and you are no longer using
your coffeemaker.
Unplug the power cord when not using the
coffeemaker.
4
brewing