Fitting The Swan Neck; Switching On The Camera; Switching Off The Camera; Operating The Device - Medion LIFE E49020 Manual De Instrucciones

6.2. Fitting the swan neck

 Fit the swan neck by inserting the locking pin into the corresponding recess on
the inspection camera.
 Then tighten the screw thread.

6.3. Switching on the camera

 Press the ON/OFF button for around 3 seconds. The camera switches on, the
operating LED lights up in green and the monitor switches on.
6.4. Switching off the camera
 Press the ON/OFF button again for around 3 seconds. The camera and the
operating LED switch off and the display goes out.

7. Operating the device

This inspection camera enables you to also check inaccessible places above the
screen and illuminate them with the LED lights.
The orientation of the camera recording can be set in 4 different positions:
Normal Mirrord
180° rotated
Mirrored
ES
DE
EN
Normal
180° rotated
49 of 54