Zoeller 1332-0006 Manual De Instrucciones página 11

16. Support inlet pipe with pipe support (not
included).
PUMP INSTALLATION FOR WELL AND SURFACE WATER
1. Mount pump on a solid foundation as close
to the water source as possible.
CAUTION: Support the 2 in. inlet
pipe from the well or lake to the inlet port
to prevent sagging. Sagging will create air
pockets within the pipe that will prevent the
pump from priming and operating correctly.
2. Glue female 2 in. union (not included) to
the end of inlet pipe leading from the water
source.
16
Pipe
support
Water level
1
100 PSI
Pressure
Gauge
Union
Well Seal
Inlet
Pipe
Well
Water Level
2
Water
Level
11
Slope pipe upward
from water source
Use a concrete block or
other solid material to
support suction pipe
Priming Plug
Union
Outlet
Pipe
Discharge to
Sprinkler System
Outlet Pipe
2 in.
Female
Union
Inlet
Pipe
Ball
Valve