Beko TBV8106BX Manual De Usuario página 24

3
Cleaning and care
3.2 Washing or replacing the filter
The vacuum suction head (21) on the appliance is assembled with a wash-
able permanent filter to avoid trouble in case the jug lid (3) is spattered
with food, as this can block the vacuum passage and cause trouble.
Press
Press the latches of suction
head cover (21) at both sides
to remove it downward.
The jug lid (3) is also assembled with a washable permanent filter.
Open
Turn over the lid (3) and open
the backflow prevention cap
by turning it anti-clockwise to
remove it from the lid (3).
24 / EN
Filter
Vacuum
seal
Suction
head cover
Take out the filter (19) from
the vacuum seal (20) to wash
or rinse it, or replace a new
one.
Open
Take out the backflow pre-
vention cap to wash or rinse
then to dry it. Make sure there
is no water or foods blocked
venting holes.
Place and secure the suc-
tion head cover (21) back be-
fore use.
Lock
Lock
Place and secure the back-
flow prevention cap back by
turning it clockwise before
use.