Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DEsCRIPTION
Speedaire Electronic Timer Drain Valves remove condensed water and oil from the air
receiver tank. Additional drains may be installed throughout your compressed air system,
including aftercoolers, filters, drip legs and dryers. The Condensate Drain Valve operates
on a timer which can be set to automatically drain at operator determined intervals.
UNPaCkING
Inspect:
•
Remove the Condensate Drain Valve from packaging and inspect
for transportation damage. Ensure the voltage rating on the solenoid
valve matches your power supply.
•
see general safety Instructions on page 2, and cautions and
Warnings as shown.
GENERal saFETy INsTRUCTIONs
To ensure safe and enduring performance of this product, you must comply
with the instructions enclosed herein. Non-compliance with instructions
or improper handling of the product will void your warranty. This product
is designed to drain condensate from compressed air systems. Usage of
this product in conditions not specified in this manual or contrary to the
instructions hereby provided is considered improper. The manufacturer
will not be held liable for any damages resulting from improper use
of the product.
attention:
•
Observe valid and generally accepted safety rules when planning,
installing and using this product.
•
Take proper measures to prevent unintentional operation of the
product or damage to it.
•
Do not attempt to disassemble this product or lines in the system
while they are under pressure.
•
Always depressurize the compressed air system before working
on the system.
•
Installation and maintenance work should be carried out in accordance
with the relevant local regulations and codes of practice and only
by suitably qualified personnel.
activity. Eye Protection goggles or safety glasses are always
recommended during installation and maintenance.
Disconnect or depressurize compressed air line
(system) prior to any installation or maintenance
1
Tabla de contenido
